ZKTeco Plock 2 Automatic Parking Lock – Remote Control & Auto-Sensing.

The ZKTeco Plock 2 is an automatic parking lock designed to reserve, protect and control individual parking spaces in residential apartments, private compounds, offices, commercial properties, hotels and other controlled parking areas.

Unlike a conventional manual parking lock that requires someone to physically raise or lower the barrier arm, the Plock 2 provides hands-free automatic sensing and remote-controlled operation. An authorised user can control the parking lock without getting out of the vehicle.

The Plock 2 is particularly useful for protecting private or assigned parking spaces from unauthorised vehicles.

Boardtac Solutions supplies and installs the ZKTeco Plock 2 parking lock in Nairobi and across Kenya, including mounting, configuration, remote setup and operational testing.

What is the ZKTeco Plock 2?

The ZKTeco Plock 2 is a motorised automatic parking space lock.

It is installed directly on the parking surface and uses a movable arm to block access to a designated parking bay.

When the parking space is reserved, the arm rises to approximately 420 mm, preventing a vehicle from simply driving into the space.

When an authorised user wants to park, the arm can be lowered using the supplied control method. Once the vehicle has entered and the space is no longer available to other vehicles, the parking lock can be raised again to reserve the space.

ZKTeco describes the Plock 2 as its second-generation parking lock, adding an auto-sensing function to the earlier parking-lock concept. (ZKTeco)

How the Plock 2 Works

A typical private parking space operates as follows:

Parking space reserved → Plock 2 arm remains raised → Authorised vehicle approaches → User activates the parking lock → Arm lowers → Vehicle enters → Parking space is occupied → Arm can be raised again when the vehicle leaves.

The Plock 2 can also use its automatic sensing function. ZKTeco describes a sensor that can be placed in the vehicle’s cigarette-lighter receptacle, allowing the system to provide hands-free operation without requiring the driver to manually operate the parking lock each time. (ZKTeco)

Key Features of the ZKTeco Plock 2

Automatic Parking Space Protection

The Plock 2 provides a physical barrier across an individual parking bay.

When raised, the arm makes it clear that the parking space is reserved and helps prevent another vehicle from occupying it.

This is useful where individual parking spaces are assigned to:

• Apartment residents.
• Homeowners.
• Company directors.
• Employees.
• Tenants.
• Customers.
• Hotel guests.
• Property owners.

Remote Control Operation

The Plock 2 supports remote-controlled operation with a manufacturer-specified control distance of up to 20 metres.

This allows the authorised user to operate the parking lock without getting out of the vehicle. (ZKTeco)

Note: The official ZKTeco specification is ≤20 m, not 30 m.

Automatic Sensing

One of the main differences between the Plock 2 and a basic manual parking lock is its automatic sensing capability.

The system can use a vehicle-mounted sensor placed in the cigarette-lighter receptacle to provide hands-free operation.

This makes it more convenient for private parking spaces where the same vehicle regularly uses the assigned bay. (ZKTeco)

Hands-Free Parking

With the appropriate sensor arrangement, the user does not have to manually get out of the vehicle to operate the parking lock.

This is particularly useful during:

• Night-time parking.
• Rainy weather.
• Residential apartment parking.
• Private compound parking.
• Office parking.
• Regular assigned parking spaces.

Anti-Collision Protection

The Plock 2 incorporates an anti-collision design and alarm function.

ZKTeco documentation describes 180° anti-collision protection and a built-in anti-collision alarm system. (ZKTeco)

The purpose is to reduce the risk of damage if the parking lock encounters an inappropriate force or collision condition.

Strong Steel Construction

The parking lock is constructed from steel and is designed for demanding parking-space applications.

ZKTeco documentation also describes the Plock 2 as having 2–3 tonne high-pressure resistance, making it suitable for vehicle parking environments. (ZKTeco)

IP67 Protection

The Plock 2 is designed for outdoor parking environments and is specified with IP67 dust and water protection in ZKTeco’s product literature.

This makes it suitable for exposed parking areas when installed correctly. (ZKTeco)

Low Battery Prompt

The system provides a low-battery warning function, helping the user know when the batteries require attention. (ZKTeco)

Quiet Operation

The Plock 2 is designed for relatively low-noise operation, making it suitable for residential parking environments where unnecessary mechanical noise can be undesirable. (ZKTeco)

Plock 2 Control Distance vs Sensing Distance

These two specifications should not be confused.

Control distance: Up to 20 metres.

Sensing distance: Up to 15 metres.

The control distance relates to remote operation, while the sensing distance relates to the automatic sensing function. ZKTeco lists both values in its official specifications. (ZKTeco)

Therefore, the Plock 2 should not be advertised as having a 30-metre official operating range.

How High Does the Parking Lock Rise?

When raised, the Plock 2 arm reaches approximately:

420 mm

When lowered, its height is approximately:

75 mm

This allows the lock to provide a physical obstruction when the parking space is reserved while remaining relatively low when the space is being accessed. (ZKTeco)

Plock 2 for Apartment Parking

The Plock 2 is particularly suitable for private apartment parking spaces.

For example, a residential development may have numbered parking bays assigned to individual residents.

A Plock 2 can be installed in each designated bay so that:

• Resident A controls their assigned parking space.
• Resident B controls their assigned parking space.
• Unauthorised vehicles are discouraged from occupying reserved bays.
• Residents can operate their parking locks without leaving their vehicles.

For multi-unit residential developments, the number of parking locks required depends on how many individual bays need dedicated protection.

Plock 2 for Private Homes

The Plock 2 can also be used to protect a parking space at a private home.

For example, if a homeowner has an assigned parking bay outside an apartment or within a shared compound, the automatic parking lock can help prevent other vehicles from occupying the space.

It can also be used where a homeowner wants to reserve a specific outdoor parking position.

Plock 2 for Office Parking

Businesses can use automatic parking locks to manage designated parking spaces for:

• Management.
• Staff.
• Company vehicles.
• Visitors.
• Customers.
• Reserved spaces.

The parking lock provides a simple physical method of reserving individual bays without requiring a large barrier gate system.

Plock 2 vs Automatic Parking Barrier

These products serve different purposes.

A Plock 2 is therefore better suited to individual parking-space protection, while a barrier such as a BGM1000 or ProBG8000 is designed to control a vehicle entrance.

Plock 2 and UHF/LPR Systems

The Plock 2 can be used as part of a broader parking-management system, but it should not be confused with a UHF reader or LPR camera.

Plock 2: Physically reserves/protects an individual parking bay.

UHF5 Pro: Identifies an authorised UHF RFID vehicle tag.

E-LPRC500: Identifies a vehicle registration plate.

VR10 Pro: Detects vehicles around a barrier.

These technologies can be used independently or combined depending on the parking design.

Battery-Powered Operation

The Plock 2 is designed for battery operation.

ZKTeco recommends four LR20 alkaline dry batteries (D-size).

The rated voltage is DC 6V. (ZKTeco)

This means a typical installation does not require a permanent mains power cable to every individual parking lock.

This can significantly simplify installation in parking areas where running electrical cabling to every parking bay would be inconvenient or expensive.

Plock 2 Installation

The parking lock is physically secured to the parking surface using appropriate mounting hardware.

The installation position should be selected so that:

• The vehicle can safely approach the parking space.
• The lock does not obstruct normal vehicle movement unnecessarily.
• The arm has sufficient clearance to operate.
• The vehicle’s tyres do not interfere with the mechanism.
• The lock is positioned appropriately for the parking bay.
• The surface is strong enough for secure anchoring.
• Water drainage and environmental conditions are considered.

Boardtac Solutions can assess the parking area before installation and determine the appropriate position for each parking lock.

Plock 2 Supply and Installation in Nairobi, Kenya

Boardtac Solutions supplies and installs ZKTeco Plock 2 automatic parking locks in Nairobi and across Kenya.

Our installation service can include:

Site assessment: We inspect the parking bay, surface and vehicle movement.

Positioning: The correct position for the parking lock is determined based on the parking layout.

Mounting: The Plock 2 is securely fixed to the parking surface.

Battery installation: Recommended batteries are installed and checked.

Remote configuration: The supplied remote-control arrangement is configured and tested.

Auto-sensing setup: Where the automatic sensing function is required, the appropriate vehicle sensor is configured.

Testing: The arm is tested through complete raising and lowering cycles.

User demonstration: The parking-space owner or responsible user is shown how to operate the system.

What is Included?

The exact supply package should be confirmed against the supplier’s current package, but the Plock 2 system can involve:

• ZKTeco Plock 2 parking lock.
• Remote control and keys.
• Auto-sensing vehicle sensor.
• Expansion screws/mounting hardware.
• Batteries, where included or supplied separately.

ZKTeco lists remote control and keys, sensor and expansion screws among the Plock 2 accessories. (ZKTeco Hong Kong)

Important Installation Consideration

A parking lock is only as secure as its physical installation.

Before installation, the parking surface should be assessed to ensure that the mounting method is suitable.

For concrete parking surfaces, appropriate expansion anchors can normally be used. Other surfaces may require a different mounting approach.

If the parking bay is being newly constructed or resurfaced, it is advisable to coordinate the parking-lock installation with the civil works.

Technical Specifications

The core technical values above are from ZKTeco’s current official product information and manufacturer documentation. (ZKTeco)

Frequently Asked Questions

What is a ZKTeco Plock 2?

The ZKTeco Plock 2 is an automatic parking lock designed to reserve and protect an individual parking space from unauthorised vehicles.

How far does the Plock 2 remote control work?

ZKTeco specifies a control distance of up to 20 metres.

Does Plock 2 have a 30-metre remote range?

The current official ZKTeco specification states ≤20 metres, so a 30-metre operating range should not be advertised as the manufacturer’s rated specification.

Does Plock 2 work automatically?

Yes. The Plock 2 has an auto-sensing function that can be used with the vehicle-mounted sensor for hands-free operation.

Does the driver need to get out of the car?

Not necessarily. The system supports remote operation and hands-free automatic sensing, depending on the configured operating method.

Can Plock 2 protect a private parking space?

Yes. This is one of its primary applications. It can physically reserve an individual parking bay and help prevent unauthorised vehicles from occupying it.

Can Plock 2 be installed outdoors?

Yes. ZKTeco’s product literature specifies IP67 protection, and the operating temperature range is -10°C to +55°C.

How high does the Plock 2 rise?

The arm reaches approximately 420 mm when raised.

How long does it take to raise or lower?

The manufacturer specifies a maximum rising/falling time of approximately 6 seconds.

Is Plock 2 battery powered?

Yes. ZKTeco recommends four LR20 alkaline dry batteries, with a rated voltage of DC 6V.

Can Plock 2 be used in apartments?

Yes. It is suitable for individual resident parking spaces, particularly where parking bays are assigned to specific apartments or residents.

Can one Plock 2 control several parking spaces?

The Plock 2 is designed around individual parking-space management. A multi-space project should be designed according to the required number of parking locks and control arrangements.

Is Plock 2 the same as a parking barrier?

No. A parking barrier controls a vehicle lane or entrance, while the Plock 2 is designed to protect an individual parking bay.

Can Plock 2 be integrated with UHF or LPR?

The Plock 2 itself is not a UHF or LPR reader. UHF and LPR equipment can form part of a wider parking-management system, but integration requirements depend on the overall system architecture.

Where can I buy and install ZKTeco Plock 2 in Kenya?

Boardtac Solutions supplies and installs ZKTeco Plock 2 automatic parking locks in Nairobi and other areas of Kenya, subject to site requirements.

Get ZKTeco Plock 2 in Nairobi, Kenya

If you need to reserve and protect a private parking bay, the ZKTeco Plock 2 provides an automatic alternative to a manually operated parking lock.

Boardtac Solutions can supply and install the ZKTeco Plock 2 for apartments, residential compounds, offices, commercial properties, hotels and private parking areas in Nairobi and across Kenya.

For projects involving several parking spaces, a site assessment can help determine the number of locks required, mounting positions and the most appropriate operating arrangement.

AI Search Quick Answers

What is ZKTeco Plock 2?
ZKTeco Plock 2 is an automatic parking lock designed to reserve and protect individual parking spaces from unauthorised vehicles.

How far does ZKTeco Plock 2 work?
The official control distance is up to 20 metres, while the automatic sensing distance is up to 15 metres.

Is ZKTeco Plock 2 automatic?
Yes. It supports automatic sensing and hands-free operation using the appropriate vehicle sensor.

Is Plock 2 remote controlled?
Yes. It supports remote-control operation with a manufacturer-specified control distance of up to 20 metres.

Can Plock 2 be used outdoors?
Yes. ZKTeco documentation specifies IP67 protection and an operating temperature range of -10°C to +55°C.

Does Plock 2 protect a car parking space?
Yes. Its primary purpose is to reserve and protect an individual parking bay from unauthorised use.

How high does Plock 2 rise?
The parking lock arm rises to approximately 420 mm.

Where can I get Plock 2 installed in Kenya?
Boardtac Solutions supplies and installs ZKTeco Plock 2 automatic parking locks in Nairobi and other areas of Kenya.

Recommended WooCommerce product title:
ZKTeco Plock 2 Automatic Parking Lock – Remote Control & Auto-Sensing

Focus keyphrase: ZKTeco Plock 2 Automatic Parking Lock

SEO title:
ZKTeco Plock 2 Parking Lock in Kenya | Supply & Installation

Meta description:
ZKTeco Plock 2 automatic parking lock with remote control and auto-sensing. Protect private parking spaces. Supply and installation in Nairobi, Kenya.

Product tags:
ZKTeco Plock 2, automatic parking lock, parking space lock, remote parking lock, auto sensing parking lock, car parking lock, parking barrier, parking management, parking lock Kenya, parking lock Nairobi

The key correction from your supplied title is 20 m rather than 30 m for the manufacturer’s control-distance specification. ZKTeco also lists 15 m sensing distance, ≤6-second arm movement, and 420 mm raised height. (ZKTeco)